Hao-Chiao Hong
Professor
Name Hao-Chiao Hong
Email hchong@mail.nctu.edu.tw
Office Tel No. +886-3-5712121 ext.54375
Research expertise Mixed-signal circuit design including ADC, DAC, audio codec, PLL, filters, power management, high speed serial interfaces, and sensor interfaces; design-for-testability (DfT), built-in self-test (BIST), and calibration techniques for mixed-signal circuits.
0
Professor Profile Analog IC Design
Job title Professor
Year Paper Title
2017 Yi Chiu, Hao-Chiao Hong, and Wei-Hung Hsu, "Wideband vibrational electromagnetic energy harvesters with nonlinear polyimide springs based on rigid-flex printed circuit boards technology," Smart Materials and Structures, Vol. 25, No.12, pp. 1-8, Dec., 2016 (SCI) 
2016 Hao-Chiao Hong, Yung-Shun Chen, and Wei-Chieh Fang,"14 GSps four-bit noninterleaved data converter pair in 90 nm CMOS with built-in eye diagram testability," IEEE Transactions on Very Large Scale Integration (VLSI) Systems, Vol. 22, No. 6,  pp. 1238–1247, June, 2014 (SCI, EI)' target='_blank'>Hao-Chiao Hong, Yung-Shun Chen, and Wei-Chieh Fang,"14 GSps four-bit noninterleaved data converter pair in 90 nm CMOS with built-in eye diagram testability," IEEE Transactions on Very Large Scale Integration (VLSI) Systems, Vol. 22, No. 6,  pp. 1238–1247, June, 2014 (SCI, EI)
2016 Vol. 63, No. 12, pp. 2750- 2760, December, 2014 (SCI, EI)

' target='_blank'>Shao-Feng Hung and Hao-Chiao Hong, "A Fully Integrated BIST ΔΣ ADC Using the In-Phase and Quadrature Waves Fitting Procedure," (Regular paper) IEEE Transactions on Instrumentation and Measurement, Vol. 63, No. 12, pp. 2750- 2760, December, 2014 (SCI, EI)

2016 Yi Chiu, Hao-Chiao Hong, and W.-H. Hsu, "Nonlinear electromagnetic energy harvesters fabricated by rigid-flex printed circuit board technology," J. Phys.: Conf. Ser., Vol. 660, No. 1, pp. 12083-12086, Jan. 2015
2016 Hao-Chiao Hong, Yun-Tse Chen, Shao-Feng Hung, Chin-Cheng Wu, and Yi Chiu, "An angle demodulator IC using periodically reset integration for the path matched differential interferometry based sensors," (Regular paper) IEEE Sensors Journal, Vol. 16, No. 12, pp. 4856- 4865, Jun., 2016 (SCI)
2014 Hao-Chiao Hong, Sheng-Chaun Liang, and Hong-Chin Song, “A built-in-self-test S-D ADC prototype,” Journal of Electronic Testing: Theory and Applications (JETTA), Vol. 25, No. 2-3, pp. 145-156, Jun., 2009 (SCI)
2014  Hao-Chiao Hong, Jyun-Liang Huang, Kwang-Ting Cheng, Cheng-Wen Wu, and Ding-Ming Kwai, “Practical considerations in applying Sigma-Delta modulation-based analog BIST to sampled-data systems,” IEEE Transactions on Circuits and Systems II: Analog and Digital Signal Processing (TCAS-II), Vol. 50, No. 9, pp. 553-566, Sep., 2003 (SCI)
2014 Hao-Chiao Hong and Guo-Ming Lee, “A 65 fJ/conversion-step 0.9-V 200-KS/s rail-to-rail 8-bit successive approximation ADC,” IEEE Journal of Solid-State Circuits (JSSC), Vol. 42, No. 10, pp. 2161-2168, Oct., 2007 ' target='_blank'>Hao-Chiao Hong and Guo-Ming Lee, “A 65 fJ/conversion-step 0.9-V 200-KS/s rail-to-rail 8-bit successive approximation ADC,” IEEE Journal of Solid-State Circuits (JSSC), Vol. 42, No. 10, pp. 2161-2168, Oct., 2007 
2014 Hao-Chiao Hong, “A Fully-settled linear behavior plus noise model for evaluating the digital stimuli of the design-for-digital-testability Sigma-Delta modulators,” Journal of Electronic Testing: Theory and Applications (JETTA), Vol. 23, pp.527-538, Dec., 2007 (SCI)
2014 Hao-Chiao Hong, “A design-for-digital-testability circuit structure for Sigma-Delta modulators,” IEEE Transactions on Very Large Scale Integration (VLSI) Systems, Vol. 15, No. 12, pp. 1341-1350, Dec., 2007 (SCI)
2014 Hao-Chiao Hong and Sheng-Chaun Liang, “A decorrelating design-for-digital- testability scheme for S-D modulators,” IEEE Transactions on Circuits and Systems I: Regular Papers (TCAS-I), Vol. 56, No. 1, pp. 60-73, Jan., 2009 (SCI)
2014 Hao-Chiao Hong, Fang-Yi Su, and Shao-Feng Hung, “A fully integrated built-in-self-test Σ-Δ ADC based on the modified controlled sine wave fitting procedure,” IEEE Transactions on Instrumentation and Measurement (TIM), Vol. 59, No. 9, pp. 2334-2344, Sept., 2010. (SCI)
2014 Sheng-Chaun Liang and Hao-Chiao Hong, “A digitally testable Σ-Δ modulator using the decorrelating Design-for-digital-testability scheme,” IEEE Transactions on Very Large Scale Integration (VLSI) Systems, Vol. 19, No. 3, pp. 503-507, Mar., 2011. (SCI)
2014 Hao-Chiao Hong,  “A Static Linear Behavior Analog Fault Model for Switched-Capacitor Circuits,” IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems (TCAD), Vol. 31, No.4, pp. 597-609, Apr., 2012. (SCI)
2014 Shao-Feng Hung and Hao-Chiao Hong, “Experimental Results of Testing a BIST Σ–Δ ADC on the HOY Wireless Test Platform,” Journal of Electronic Testing: Theory and Applications (JETTA), Vol. 28, Issue 5, pp. 571-584, Nov. 2012, DOI:10.1007/s10836-012-5302-7 (SCI)
2014 Yi Chiu, Hao-Chiao Hong, and Po-Chih Wu, "Development and Characterization of a CMOS-MEMS Accelerometer with Differential LC-Tank Oscillators," IEEE Journal of Microelectromechanical SystemsVol. 22, No.6, pp. 1285-1295, Dec.,  2013. (SCI)
2014 Yi Chiu, Tsung-Chih Huang, and Hao-Chiao Hong, "A Three-Axis Single-Proof-Mass CMOS-MEMS Piezoresistive Accelerometer with Frequency Output," Sensors and Materials, Vol. 26, No. 2,  pp. 95–108, February, 2014 (SCI)
2013 Hao-Chiao Hong and Cheng-Wen Wu, “Selection of high-order analog response extractor for S-D modulation based analog built-in self-test applications,” International Journal of Electrical Engineering, Vol. 11, No.2, pp.103-115, May, 2004. ' target='_blank'>Hao-Chiao Hong and Cheng-Wen Wu, “Selection of high-order analog response extractor for S-D modulation based analog built-in self-test applications,” International Journal of Electrical Engineering, Vol. 11, No.2, pp.103-115, May, 2004. 
Year Paper Title
2017 C.-Y. Chiang, L.-Y. Lin, H.-C. Hong, "Design and Experimental Results of a Wireless Power Receiver for the Water Pollution Detection System," in  Proc.  of  the 4th International Symposium on Next-Generation Electronics (IEEE ISNE 2015),  Taipei,  May , 2015
2017 H.-Y. Huang, S.-Z. Yen, J.-H. Chen, H.-C. Hong, K.-H. Cheng, " Low-Voltage Indoor Energy Harvesting Using Photovoltaic Cell,"  Proc. the IEEE Design and Diagnostics of Electronic Circuits and Systems Workshop (DDECS), Slovakia, April, 2016 (IEEE) 
2017 Y. Chiu, H.-C. Hong, and C.-W. Lin, "Inductive CMOS MEMS accelerometer with integrated variable inductors," IEEE MEMS Conf. 2016, China, pp. 974-7 (IEEE)
2017 H.-C. Hong, " Analysis for the Optimal Designs of Two-coil Inductive Coupling Wireless Power Transfer Systems," presented in Progress In Electromagnetics Research Symposium (PIERS), St. Petersburg, Russia, May, 2017
2017
2017 Y. Chiu and H.-C. Hong, " Electromagnetic energy harvester with embedded ferrofluid in PCB technology," Proc. the 17th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS)Kanazawa, Japan, Nov., 2017
2017  Hao-Chiao Hong, Yun-Tse Chen, Shao-Feng Hung, Chin-Cheng Wu, and Yi Chiu, "A cost-effective angle demodulator IC for path matched differential interferometry based sensors," in Proc. IEEE Sensors Conferencepp.1-4, Valencia, Spain, November, 2014 (IEEE) 
2017 Y. Chiu, H.-C. Hong, and W.-H. Hsu, "Effect of asymmetric structures on output enhancement in electromagnetic energy harvesters fabricated by rigid-flex PCB technology," accepted for presentation in Asia-Pacific Conference of Transducers and Micro-Nano Technology, APCOT 2016, Japan (2016) 
2017 Chih-Chien Chang and Hao-Chiao Hong, "A 5MS/s Fully-Differential SAR ADC with an ENOB of 8.5," in Proceedings of International Conference on Electrical Engineering and Computer Science (EECS), pp.1-4, TokyoJapan, March, 2013 ' target='_blank'>Chih-Chien Chang and Hao-Chiao Hong, "A 5MS/s Fully-Differential SAR ADC with an ENOB of 8.5," in Proceedings of International Conference on Electrical Engineering and Computer Science (EECS), pp.1-4, TokyoJapan, March, 2013 
2017 Shao-Feng. Hung, Long-Yi Lin, and Hao-Chiao Hong, "Testing the Fleischer-Laker switched-capacitor biquad using the diagnosis-after-test procedure,” in Proceedings of  the 9th International SoC Design Conference (ISOCC)pp.179-184, JejuKoreaNovember, 2012 (IEEE)' target='_blank'>Shao-Feng. Hung, Long-Yi Lin, and Hao-Chiao Hong, "Testing the Fleischer-Laker switched-capacitor biquad using the diagnosis-after-test procedure,” in Proceedings of  the 9th International SoC Design Conference (ISOCC)pp.179-184, JejuKoreaNovember, 2012 (IEEE)
2017  Rong-Zhou Kuo and Hao-Chiao Hong, “Design of an Ultra-Low Power SAR ADC for Biomedical Applications,” in Proc. the 2nd International Conference on BioSensors, BioElectronics, BioMedical Devices, BioMEMS/NEMS and Applications 2013 (Bio4Apps 2013), TokyoJapan, Oct., 2013
2017  Long-Yi Lin and Hao-Chiao Hong, “Design of a fault-injectable Fleischer-Laker switched-capacitor biquad for verifying the static linear behavior fault model,” in Proc. IEEE Asian Test Symposium  (ATS), pp. 62-66, Yi-Lan, Nov., 2013 (IEEE)
2017 Rong-Zhou Kuo and Hao-Chiao Hong, "A 17-nW, 0.5V, 500S/s, Rail-to-Rail SAR ADC with 8.1 Effective Number of Bits", in Proc. the International VLSI Design, Automation and Test Symposium (VLSI-DAT), Hsinchu, pp. 1-4, April, 2014  (IEEE) ' target='_blank'> Rong-Zhou Kuo and Hao-Chiao Hong, "A 17-nW, 0.5V, 500S/s, Rail-to-Rail SAR ADC with 8.1 Effective Number of Bits", in Proc. the International VLSI Design, Automation and Test Symposium (VLSI-DAT), Hsinchu, pp. 1-4, April, 2014  (IEEE) 
2017 Yi-Wei Chen and Hao-Chiao Hong, " A Fast-Locking All-Digital Phase Locked Loop in 90nm CMOS for Gigascale Systems," in Proc. the IEEE International Symposium on Circuits and Systems (ISCAS),Melbourne, Australiapp. 1134-1137, June, 2014  (IEEE) ' target='_blank'> Yi-Wei Chen and Hao-Chiao Hong, " A Fast-Locking All-Digital Phase Locked Loop in 90nm CMOS for Gigascale Systems," in Proc. the IEEE International Symposium on Circuits and Systems (ISCAS),Melbourne, Australiapp. 1134-1137, June, 2014  (IEEE) 
2017  Shao-Feng Hung,  Long-Yi Lin, and Hao-Chiao Hong, "A Cost-Effective Stimulus Generator for Battery Channel Characterization in Electric Vehicles," in Proc. IEEE Asian Test Symposium,  HangZhou, November, 2014 (IEEE)

2017 Y. Chiu, R. P. Bargayo, and H.-C. Hong, " Stacked electret energy harvesting system fabricated with folded flexible printed circuit board," Proc. Power MEMS, Atlanta, Dec. 2012, pp. 149-152
2017 C.-Y. Chiang, H.-C. Hong, J.-C. Chiao, L.-Y. Lin, and Y. Chiu, “A wirelessly-powered implantable stimulator for relieving gastroparesis symptoms,” in Proc. the 4th International Conference on BioSensors, BioElectronics, BioMedical Devices, BioMEMS/NEMS and Applications (Bio4Apps), Fukuoka, Japan, Dec., 2015 
2017 H.-C. Hong, L.-Y. Lin, and C.-J. Liu, " Design of an On-Scribe-Line 12-bit Dual-Slope ADC for Wafer Acceptance Test," Proc. IEEE International Conference on Applied System Innovation (CASI), Sapporo, Japan, May, 2017 (EI, IEEE)
2017 Y. Chiu, H.-C. Hong, and C.-M. Chang, " Three-axis CMOS MEMS inductive accelerometer with novel Z-axis sensing scheme," Proc. the 19th International Conference on Solid-State Sensors, Actuators, and Microsystems (Transducers), Kaohsiung, Taiwan, Jun., 2017
2016 Yi Chiu, Hao-Chiao Hong, and Po-Chih Wu “CMOS-MEMS accelerometer with differential LC-tank oscillators,” Proc. IEEE Sensors Conference, pp. 1-4, October, 2012 (IEEE)' target='_blank'>Yi Chiu, Hao-Chiao Hong, and Po-Chih Wu “CMOS-MEMS accelerometer with differential LC-tank oscillators,” Proc. IEEE Sensors Conference, pp. 1-4, October, 2012 (IEEE)
2016 Y. Chiu, B.-T. Chen, and H.-C. Hong, “Integrated CMOS MEMS liquid capacitive inclinometer,” Proc. the 18th International Conference on Solid-State Sensors, Actuators and Microsystems, Transducers 2015, U.S.A, pp. 1152-5 (2015) 
2014 Shao-Fung Hung, Hao-Chiao Hong, and Sheng-Chaun Liang “A Low-Cost Output Response Analyzer for the Built-in-Self-Test S-D Modulator Based on the Controlled Sine Wave Fitting Method,” in Proceedings of the IEEE Asian Test Symposium (ATS), pp.385-388, November, 2009  (IEEE)' target='_blank'>Shao-Fung Hung, Hao-Chiao Hong, and Sheng-Chaun Liang “A Low-Cost Output Response Analyzer for the Built-in-Self-Test S-D Modulator Based on the Controlled Sine Wave Fitting Method,” in Proceedings of the IEEE Asian Test Symposium (ATS), pp.385-388, November, 2009  (IEEE)
2014 Chen-Kang Ho and Hao-Chiao Hong, “A 6-GS/s, 6-bit, At-speed Testable ADC and DAC Pair in 0.13mm CMOS,” in Proceedings of the International Symposium on VLSI Design, Automation, and Test (VLSI-DAT), pp.207-210, April, 2009 (Granted the best paper award, symposium acceptance rate=30%, 53/178) (IEEE)' target='_blank'>Chen-Kang Ho and Hao-Chiao Hong, “A 6-GS/s, 6-bit, At-speed Testable ADC and DAC Pair in 0.13mm CMOS,” in Proceedings of the International Symposium on VLSI Design, Automation, and Test (VLSI-DAT), pp.207-210, April, 2009 (Granted the best paper award, symposium acceptance rate=30%, 53/178) (IEEE)
2014 Hao-Chiao Hong, Sheng-Chaun Liang, and Hong-Chin Song, “A cost effective BIST second-order S-D modulator,” in Proceedings of the IEEE Design and Diagnostics of Electronic Circuits and Systems Workshop (DDECS), pp.314-319, April, 2008  (IEEE)' target='_blank'>Hao-Chiao Hong, Sheng-Chaun Liang, and Hong-Chin Song, “A cost effective BIST second-order S-D modulator,” in Proceedings of the IEEE Design and Diagnostics of Electronic Circuits and Systems Workshop (DDECS), pp.314-319, April, 2008  (IEEE)
2014 Sheng-Chaun Liang, Ding-Jyun Huang, Chen-Kang Ho, and Hao-Chiao Hong, “10 GSamples/s, 4-bit, 1.2V, Design-for-Testability ADC and DAC in 0.13um CMOS Technology,” in Proceedings of the IEEE Asian Solid-State Circuits Conference (A-SSCC), pp. 416-419, October, 2007, (acceptance rate=32%, 107/332)  (IEEE)' target='_blank'>Sheng-Chaun Liang, Ding-Jyun Huang, Chen-Kang Ho, and Hao-Chiao Hong, “10 GSamples/s, 4-bit, 1.2V, Design-for-Testability ADC and DAC in 0.13um CMOS Technology,” in Proceedings of the IEEE Asian Solid-State Circuits Conference (A-SSCC), pp. 416-419, October, 2007, (acceptance rate=32%, 107/332)  (IEEE)
2014 Hao-Chiao Hong and Sheng-Chaun Liang, “A cost effective output response analyzer for S-D modulation based BIST systems,” in Proceedings of the 15th IEEE Asian Test Symposium (ATS), pp.255-261, Nov. 2006.  (IEEE)' target='_blank'>Hao-Chiao Hong and Sheng-Chaun Liang, “A cost effective output response analyzer for S-D modulation based BIST systems,” in Proceedings of the 15th IEEE Asian Test Symposium (ATS), pp.255-261, Nov. 2006.  (IEEE)
2014 Hao-Chiao Hong, “Improving the behavioral simulation accuracy of the design-for-digital-testability second-order S-D modulator,” in the 11th International Mixed-Signal Testing Workshop (IMSTW), Canne, June, 2005 (IEEE)' target='_blank'>Hao-Chiao Hong, “Improving the behavioral simulation accuracy of the design-for-digital-testability second-order S-D modulator,” in the 11th International Mixed-Signal Testing Workshop (IMSTW), Canne, June, 2005 (IEEE)
2014 Hao-Chiao Hong, “Design-for-digital-testability 30MHz second-order S-D modulator,” in Proceedings of the IEEE 2004 Custom Integrated Circuit Conference (CICC) , pp. 211-214, October, 2004 (IEEE)' target='_blank'>Hao-Chiao Hong, “Design-for-digital-testability 30MHz second-order S-D modulator,” in Proceedings of the IEEE 2004 Custom Integrated Circuit Conference (CICC) , pp. 211-214, October, 2004 (IEEE)
2014 Hao-Chiao Hong, Jyun-Liang Huang, Kwang-Ting Cheng, and Cheng-Wen Wu, “On-chip analog response extraction with 1-bit Sigma-Delta modulators,” in Proceedings of the 11th IEEE Asian Test Symposium(ATS), pp. 49-54, Nov., 2002  (IEEE)' target='_blank'>Hao-Chiao Hong, Jyun-Liang Huang, Kwang-Ting Cheng, and Cheng-Wen Wu, “On-chip analog response extraction with 1-bit Sigma-Delta modulators,” in Proceedings of the 11th IEEE Asian Test Symposium(ATS), pp. 49-54, Nov., 2002  (IEEE)
2014 Hao-Chiao Hong, Bin-Hong Lin, and Cheng-Wen Wu, “Design and Analysis of multiple-bit Sigma-Delta modulator,” in Proceedings of the IEEE Asia and South Pacific Design Automation Conference(ASPDAC), pp. 419-424, Jan., 1997 (IEEE)' target='_blank'>Hao-Chiao Hong, Bin-Hong Lin, and Cheng-Wen Wu, “Design and Analysis of multiple-bit Sigma-Delta modulator,” in Proceedings of the IEEE Asia and South Pacific Design Automation Conference(ASPDAC), pp. 419-424, Jan., 1997 (IEEE)
2014 Shao-Fung Hung and Hao-Chiao Hong, "A Fully Integrated Built-in Self-Test Sigma-Delta ADC on a Wireless Test Platform," in Proceedings of IEEE International Mixed-Signals, Sensors, and Systems Test Workshop (IMS3TW'11), pp.78-81, Santa Barbara, California, May, 2011 (IEEE)' target='_blank'>Shao-Fung Hung and Hao-Chiao Hong, "A Fully Integrated Built-in Self-Test Sigma-Delta ADC on a Wireless Test Platform," in Proceedings of IEEE International Mixed-Signals, Sensors, and Systems Test Workshop (IMS3TW'11), pp.78-81, Santa Barbara, California, May, 2011 (IEEE)
2014 Shao-Fung Hung and Hao-Chiao Hong, “Design of a Design-for-Digital-Testability Third-Order Sigma-Delta Modulator,” in Proceedings of IEEE International Mixed-Signals, Sensors, and Systems Test Workshop (IMS3TW'11) , pp.110-113,  Santa Barbara, California, May, 2011 (IEEE)' target='_blank'>Shao-Fung Hung and Hao-Chiao Hong, “Design of a Design-for-Digital-Testability Third-Order Sigma-Delta Modulator,” in Proceedings of IEEE International Mixed-Signals, Sensors, and Systems Test Workshop (IMS3TW'11) , pp.110-113,  Santa Barbara, California, May, 2011 (IEEE)
2014 Shao-Fung Hung, Long-Yi Lin, and Hao-Chiao Hong, "A study on the design of a testable Fleischer-Laker switched-capacitor biquad," in Proceedings of International Mixed-Signals, Sensors, and Systems Test Workshop (IMS3TW'12), pp.119-121, Taipei, Taiwan, May, 2012 (IEEE)' target='_blank'>Shao-Fung Hung, Long-Yi Lin, and Hao-Chiao Hong, "A study on the design of a testable Fleischer-Laker switched-capacitor biquad," in Proceedings of International Mixed-Signals, Sensors, and Systems Test Workshop (IMS3TW'12), pp.119-121, Taipei, Taiwan, May, 2012 (IEEE)
2014 Hao-Chiao Hong, Shao-Huey Shieh, and Cheng-Wen Wu, “Optimization of the spanning tree carry look-ahead adder,” in Proceedings of the 7th VLSI/CAD symposium, pp. 253-256, Aug., 1996 ' target='_blank'> Hao-Chiao Hong, Shao-Huey Shieh, and Cheng-Wen Wu, “Optimization of the spanning tree carry look-ahead adder,” in Proceedings of the 7th VLSI/CAD symposium, pp. 253-256, Aug., 1996 
2014 Hao-Chiao Hong, Cheng-Wen Wu, and Kwang-Ting Cheng, “A S-D modulation based BIST system with a wide bandwidth fifth-order analog response extractor for diagnosis purpose,” Proceedings of the 13th IEEE Asian Test Symposium (ATS), pp. 62-67, KenTing, November, 2004 (IEEE)' target='_blank'> Hao-Chiao Hong, Cheng-Wen Wu, and Kwang-Ting Cheng, “A S-D modulation based BIST system with a wide bandwidth fifth-order analog response extractor for diagnosis purpose,” Proceedings of the 13th IEEE Asian Test Symposium (ATS), pp. 62-67, KenTing, November, 2004 (IEEE)
2013 Long-Yi Lin, Shao-Feng Hung, and Hao-Chiao Hong, “A Test Procedure to Test for the Capacitor Ratios of a Switched-Capacitor Biquad,” in the 6th VLSI Test Technology Workshop (VTTW), July, 2012 ' target='_blank'>Long-Yi Lin, Shao-Feng Hung, and Hao-Chiao Hong, “A Test Procedure to Test for the Capacitor Ratios of a Switched-Capacitor Biquad,” in the 6th VLSI Test Technology Workshop (VTTW), July, 2012 
2013 Kin-Man Lei and Hao-Chiao Hong, “A 12-bit 25MS/s Asynchronous SAR ADC,” in Proceedings of the 22nd  VLSI Design/CAD Symposium, August, 2011 ' target='_blank'>Kin-Man Lei and Hao-Chiao Hong, “A 12-bit 25MS/s Asynchronous SAR ADC,” in Proceedings of the 22nd  VLSI Design/CAD Symposium, August, 2011 
2013 Rong-Zhou Kuo and Hao-Chiao Hong “An Ultra-low Power Rail-to-Rail Successive Approximation ADC with an 8.3 ENOB,” in Proceedings of the 21st VLSI Design/CAD Symposium, pp.687-690, Aug., 2010 ' target='_blank'>Rong-Zhou Kuo and Hao-Chiao Hong “An Ultra-low Power Rail-to-Rail Successive Approximation ADC with an 8.3 ENOB,” in Proceedings of the 21st VLSI Design/CAD Symposium, pp.687-690, Aug., 2010 
2013 Tsung-Yin Hsieh and Hao-Chiao Hong, “A 1.76uW, 0.9V, 8-bit successive approximation register ADC with fully-differential input capability,” in Proceedings of the 18th VLSI Design/CAD Symposium, pp. 123-127, August, 2007 ' target='_blank'>Tsung-Yin Hsieh and Hao-Chiao Hong, “A 1.76uW, 0.9V, 8-bit successive approximation register ADC with fully-differential input capability,” in Proceedings of the 18th VLSI Design/CAD Symposium, pp. 123-127, August, 2007 
2013 Hao-Chiao Hong and Cheng-Wen Wu, “Optimal integrator gain design of extended MASH high-order S-D modulator,” in Proceedings of the 8th VLSI Design/CAD Symposium, pp. 333-336, Aug., 1997  ' target='_blank'>Hao-Chiao Hong and Cheng-Wen Wu, “Optimal integrator gain design of extended MASH high-order S-D modulator,” in Proceedings of the 8th VLSI Design/CAD Symposium, pp. 333-336, Aug., 1997  
Project Category Year Project Title Participartor Job Title Period Unit
Research Projects 2015 Hong, Hao-Chiao 2015.08 ~ 2017.07
Research Projects 2014 Hong, Hao-Chiao 2014.08 ~ 2015.07
Industrial Collaboration 2014 Wireless WAT Hong, Hao-Chiao P.I. 2014.05 ~ 2015.05 TSMC
Research Projects 2013 Hong, Hao-Chiao 2013.08 ~ 2014.07
Research Projects 2012 Design of a battery management SoC for intelligent electric cars (PI: Prof. C.-C. Su, National Chiao Tung University), Subproject-IV: Analog front end IC with built-in self-test functions for channel characterization used in the battery management system Hong, Hao-Chiao P.I. 2012.07 ~ 2013.08 National Science Council
Research Projects 2012 Design of the demodulator IC for the optical inertial sensor Hong, Hao-Chiao P.I. 2012.01 ~ 2012.12 National Science Council, Taiwan
Research Projects 2011 Design of a battery management SoC for intelligent electric cars (PI: Prof. C.-C. Su, National Chiao Tung University), Subproject-IV: Analog front end IC with built-in self-test functions for channel characterization used in the battery management system Hong, Hao-Chiao P.I. 2011.08 ~ 2012.07 National Science Council, Taiwan
Research Projects 2010 Design of a power line communication SoC for automobiles (PI: Prof. C.-C. Su, National Chiao Tung University), Subproject-I: Design of the analog front end IC for power line communication on automobiles Hong, Hao-Chiao P.I. 2011.07 ~ 2012.08 National Science Council, Taiwan
Research Projects 2009 Design of a power line communication SoC for automobiles (PI: Prof. C.-C. Su, National Chiao Tung University), Subproject-I: Design of the analog front end IC for power line communication on automobiles Hong, Hao-Chiao P.I. 2009.08 ~ 2010.07 National Science Council, Taiwan
Research Projects 2008 Design of a power line communication SoC for automobiles (PI: Prof. C.-C. Su, National Chiao Tung University), Subproject-I: Design of the analog front end IC for power line communication on automobiles Hong, Hao-Chiao P.I. 2008.08 ~ 2009.07 National Science Council, Taiwan
Research Projects 2008 A digital calibration scheme for the design of the low power pipelined ADC with open-loop amplifiers Hong, Hao-Chiao P.I. 2008.01 ~ 2012.08 National Science Council, Taiwan
Research Projects 2007 Design of a sub 1-V, 10-bit micro-Watt ADC for ECG applications Hong, Hao-Chiao P.I. 2007.08 ~ 2008.07 National Science Council, Taiwan
Industrial Collaboration 2005 Project HOY (Hypothesis, Odyssey and Yield)—Advanced Wireless Test Platform and Technologies (PI: Prof. Cheng-Wen Wu of National Tsinghua University) Hong, Hao-Chiao Subproject A Co-P.I. 2005.12 ~ 2009.11 Ministry of Economic Affairs, Taiwan
Industrial Collaboration 2005 Design of a power line communication SoC for automobiles (PI: Prof. C.-C. Su, National Chiao Tung University) Hong, Hao-Chiao P.I. of the design of the 10GS/s AD/DA pair 2005.03 ~ 2008.12 Ministry of Economic Affairs, Taiwan
Publish Date Patent Title
2016/07/15  
2016/03/18  Hao-Chiao Hong, “於類比測試中可接收數位測試激發訊號之可重新規劃切換電容輸入電路,” ROC Patent I270254. Jan. 2007
2016/03/18 Hao-Chiao Hong, “High-order Sigma Delta Modulator, ROC Patent 077991, May 1, 1996
2016/03/18 Hao-Chiao Hong and Yu-Shyn Wang, "Digital-to-Analog converter circuit and its weight estimation and calibration method thereof", Taiwan, ROC Patent I456907, issued on 10/11/2014
2016/03/18 DIGITAL-TO-ANALOG CONVERTER (DAC) CIRCUIT AND WEIGHT ERROR ESTIMATION/CALIBRATION METHOD THEREOF, " USA Patent 13/948,322' target='_blank'> Hao-Chiao Hong and Yu-Shian Wang, "DIGITAL-TO-ANALOG CONVERTER (DAC) CIRCUIT AND WEIGHT ERROR ESTIMATION/CALIBRATION METHOD THEREOF, " USA Patent 13/948,322
2016/03/18  
2016/03/18  
2016/03/18  
2016/03/18  
2016/03/18  
2014/11/10  Hao-Chiao Hong, “A reconfigurable switched-capacitor input circuit with digital stimulus acceptability for analog tests,” U.S.A. patent US7,236,116B2, Jun. 26, 2007.
2014/11/10  Hao-Chiao Hong, “Bandgap reference voltage generator with a low-cost, low-power, fast start-up circuit,” U.S.A. patent 6,972,550, Dec. 6, 2005
2014/11/10 Hao-Chiao Hong, “Device for accurately measuring amplifier’s open-loop gain with digital stimuli,” U.S.A. patent US8,112,236B2, issued on Feb. 7, 2012.' target='_blank'> Hao-Chiao Hong, “Device for accurately measuring amplifier’s open-loop gain with digital stimuli,” U.S.A. patent US8,112,236B2, issued on Feb. 7, 2012.
2014/11/10 Hao-Chiao Hong, “利用數字激發訊號來準確測量放大器開路增益之裝置,” P.R.C. patent ZL 200810002352.5 issued on 2011/11/02, Valid period: 2008/01/15- 2028/01/15' target='_blank'> Hao-Chiao Hong, “利用數字激發訊號來準確測量放大器開路增益之裝置,” P.R.C. patent ZL 200810002352.5 issued on 2011/11/02, Valid period: 2008/01/15- 2028/01/15
Year Publish Date Authors
2013 2013-06-05
2012 2012-07-08
2011 2011-08-01
2011 2011-08-01
2011 2011-08-01
2011 2011-08-01
2011 2011-08-01
2011 2011-08-01
2011 2011-08-01
2011 2011-08-01
2011 2011-08-01
2011 2011-08-01
2011 2011-08-01
2011 2011-08-01
2011 2011-08-01
2011 2011-08-01
2011 2011-08-01
2011 2011-08-01
Country School Name Department Degree Duration
Taiwan National Tsing Hua University Electrical Engineering Ph. D. ~ 2003.06
Taiwan National Tsing Hua University Electrical Engineering M.S. 1990.09 ~ 1992.06
Taiwan National Tsing Hua University Electrical Engineering B.S. 1986.09 ~ 1990.06
Organization Title Department Job Title Duration
National Chiao Tung University Electrical and Computer Engineering Professor 2012.08 ~ 0000.01
National Chiao Tung University Electrical and Computer Engineering Associate Professor 2009.03 ~ 2012.07
National Chiao Tung University Electrical and Control Engineering Associate Professor 2008.08 ~ 2009.03
National Chiao Tung University Department of Electrical and Control Engineering Assistant Professor 2004.02 ~ 2008.08
Intellectual Property Library Company Analog IP Department Senior Manager 2001.08 ~ 2004.01
TSMC Design Service Division Principle Engineer 1997.06 ~ 2001.06
Honor Category Year Award Name Awarding Unit
Internal Honor 2018 Outstanding Teaching Award Degree Program of the College of Electrical and Computer Engineering, NCTU
Internal Honor 2018 Outstanding Teaching Award College of Electrical and Computer Engineering, NCTU
External Honor 2017 Outstanding chip design award Chip Implementation Center, Ministry of Science and Technology, R.O.C.
Internal Honor 2017 Excellent teaching award College of Electrical and Computer Engineering, NCTU
External Honor 2016 Best paper award The 10th VLSI Test Technology Workshop
Internal Honor 2016 Excellent teaching award College of Electrical and Computer Engineering, NCTU
External Honor 2013 Best chip design award in MEMS category (with Prof. Yi Chiu) Chip Implementation Center, Taiwan
External Honor 2012 Outstanding chip design award in the analog design category The Chip Implementation Center, Taiwan
External Honor 2012 The diamond award (the first prize) Macronix Electronic Co. Ltd.
External Honor 2010 The best student paper award International VLSI-DAT Symposium
External Honor 2010 Outstanding chip design award in the analog design category The Chip Implementation Center, Taiwan
External Honor 2010 Excellent lecture materials award for the promoting SoC education program (With Prof. Yi Chiu) Ministry of Education, Taiwan
External Honor 2009 Outstanding chip design award in the analog design category The Chip Implementation Center, Taiwan
External Honor 2009 Best chip design award in the analog design category The Chip Implementation Center, Taiwan
External Honor 2008 Outstanding chip design award in the analog design category The Chip Implementation Center, Taiwan
External Honor 2007 Outstanding chip design award in the analog design category The Chip Implementation Center, Taiwan
External Honor 2007 Outstanding chip design award in the analog design category The Chip Implementation Center, Taiwan
External Honor 2006 The second prize in the analog circuit design category, the IC contest of universities and colleges Ministry of Education, Taiwan
Internal Honor 2005 Excellent mentor award NCTU