洪浩乔
教授
姓名 洪浩乔
职称 教授
电子邮件 hchong@mail.nctu.edu.tw
联络电话 03-5712121 ext54375
网站 http://amsdft.cn.nctu.edu.tw/
教授简介 Hao-Chiao Hong received the B.S., M.S., and Ph.D. degrees in Electrical Engineering from National Tsing-Hua University, Taiwan, in 1990, 1992, and 2003, respectively. From 1997 to 2001, he was with Taiwan Semiconductor Manufacturing Company (TSMC) where he developed mixed-signal IPs for customers and process vehicles. He joined Intellectual Property Library Company, HsinChu, Taiwan, as the senior manager of the Analog IP Department in Aug. 2001. He has been with National Chiao Tung University (NCTU), Hsinchu, Taiwan since Feb., 2004 where he is currently a professor of the Electrical and Computer Engineering department. His main research interests include the design-for-testability (DFT), built-in self-test (BIST), and calibration techniques for mixed-signal systems and high performance mixed-signal circuit design. He received the Best Paper Awards from the 2009 International Symposium on VLSI Design, Automation & Test (VLSI-DAT) and 2016 VLSI Test Technology Workshop. Dr. Hong served as the executive secretary of the Mixed-signal and RF Consortium of Ministry of Education, Taiwan from 2006 to 2008, and the executive secretary of the Heterogeneous Integration Consortium of Ministry of Education, Taiwan, from 2008 to 2009. He also served as the general chair of the sixth VLSI Test Technology Workshop (VTTW) in 2012, and the program chair of the fifth VTTW in 2011. He is a life member of Taiwan IC Design (TICD) Association and a life member of VLSI Test Technology Forum (VTTF), Taiwan.
研究专长 Mixed-signal circuit design including ADC, DAC, audio codec, PLL, filters, wireless power, power management, high speed serial interface, and sensor interfaces; design-for-testability (DfT), built-in self-test (BIST) and calibration techniques for mixed-signal circuits; Mixed-signal computing-in-memory circuit design; modeling and circuit design of Spiking neural network (SNN)
授课领域 电子学
类比电路设计导论
超大型积体电路设计导论
类比积体电路设计
前瞻类比积体电路设计
实验室 前瞻混合讯号电路暨可测试性设计实验室
简介
Analog Circuit Design including high performance ADC, DAC, Audio Codec, PLL, Filters, Power management, High speed serial interface;Design-for-testability, Built-in Self Test of Analog Circuits;Fully-customized VLSI design and testing
年度 论文名称
2018 "Electromagnetic energy harvester with embedded ferrofluid in PCB technology," , J. Phys.: Conf. Ser.,, ​1052, 012078
2018 Yi Chiu and Hao-Chiao Hong,, "Rigid-Flex PCB Technology with Embedded Fluidic Cavities and Its Application in Electromagnetic Energy Harvesters," , Micromachines, 9, 6, pp1-15
2017 Yi Chiu, Hao-Chiao Hong, and Wei-Hung Hsu, "Wideband vibrational electromagnetic energy harvesters with nonlinear polyimide springs based on rigid-flex printed circuit boards technology," Smart Materials and Structures, Vol. 25, No.12, pp. 1-8, Dec., 2016 (SCI) 
2016 Hao-Chiao Hong, Yung-Shun Chen, and Wei-Chieh Fang,"14 GSps four-bit noninterleaved data converter pair in 90 nm CMOS with built-in eye diagram testability," IEEE Transactions on Very Large Scale Integration (VLSI) Systems, Vol. 22, No. 6,  pp. 1238–1247, June, 2014 (SCI)  
2016 Vol. 63, No. 12, pp. 2750- 2760, December, 2014 (SCI)

' target='_blank'>Shao-Feng Hung and Hao-Chiao Hong, "A Fully Integrated BIST ΔΣ ADC Using the In-Phase and Quadrature Waves Fitting Procedure," (Regular paper) IEEE Transactions on Instrumentation and Measurement, Vol. 63, No. 12, pp. 2750- 2760, December, 2014 (SCI)

2016 Yi Chiu, Hao-Chiao Hong, and W.-H. Hsu, "Nonlinear electromagnetic energy harvesters fabricated by rigid-flex printed circuit board technology," J. Phys.: Conf. Ser., Vol. 660, No. 1, pp. 12083-12086, Jan. 2015
2016 Hao-Chiao Hong, Yun-Tse Chen, Shao-Feng Hung, Chin-Cheng Wu, and Yi Chiu, "An angle demodulator IC using periodically reset integration for the path matched differential interferometry based sensors," (Regular paper) IEEE Sensors Journal, Vol. 16, No. 12, pp. 4856- 4865, Jun., 2016 (SCI)
2014 Hao-Chiao Hong, Sheng-Chaun Liang, and Hong-Chin Song, “A built-in-self-test S-D ADC prototype,” Journal of Electronic Testing: Theory and Applications (JETTA), Vol. 25, No. 2-3, pp. 145-156, Jun., 2009 (SCI)
2014  Hao-Chiao Hong, Jyun-Liang Huang, Kwang-Ting Cheng, Cheng-Wen Wu, and Ding-Ming Kwai, “Practical considerations in applying Sigma-Delta modulation-based analog BIST to sampled-data systems,” IEEE Transactions on Circuits and Systems II: Analog and Digital Signal Processing (TCAS-II), Vol. 50, No. 9, pp. 553-566, Sep., 2003 (SCI)
2014 Hao-Chiao Hong and Guo-Ming Lee, “A 65 fJ/conversion-step 0.9-V 200-KS/s rail-to-rail 8-bit successive approximation ADC,” IEEE Journal of Solid-State Circuits (JSSC), Vol. 42, No. 10, pp. 2161-2168, Oct., 2007 (SCI)
2014 Hao-Chiao Hong, “A Fully-settled linear behavior plus noise model for evaluating the digital stimuli of the design-for-digital-testability Sigma-Delta modulators,” Journal of Electronic Testing: Theory and Applications (JETTA), Vol. 23, pp.527-538, Dec., 2007 (SCI)
2014 Hao-Chiao Hong, “A design-for-digital-testability circuit structure for Sigma-Delta modulators,” IEEE Transactions on Very Large Scale Integration (VLSI) Systems, Vol. 15, No. 12, pp. 1341-1350, Dec., 2007 (SCI)
2014 Hao-Chiao Hong and Sheng-Chaun Liang, “A decorrelating design-for-digital- testability scheme for S-D modulators,” IEEE Transactions on Circuits and Systems I: Regular Papers (TCAS-I), Vol. 56, No. 1, pp. 60-73, Jan., 2009 (SCI)
2014 Hao-Chiao Hong, Fang-Yi Su, and Shao-Feng Hung, “A fully integrated built-in-self-test Σ-Δ ADC based on the modified controlled sine wave fitting procedure,” IEEE Transactions on Instrumentation and Measurement (TIM), Vol. 59, No. 9, pp. 2334-2344, Sept., 2010. (SCI)
2014 Sheng-Chaun Liang and Hao-Chiao Hong, “A digitally testable Σ-Δ modulator using the decorrelating Design-for-digital-testability scheme,” IEEE Transactions on Very Large Scale Integration (VLSI) Systems, Vol. 19, No. 3, pp. 503-507, Mar., 2011. (SCI)
2014 Hao-Chiao Hong,  “A Static Linear Behavior Analog Fault Model for Switched-Capacitor Circuits,” IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems (TCAD), Vol. 31, No.4, pp. 597-609, Apr., 2012. (SCI)
2014 Shao-Feng Hung and Hao-Chiao Hong, “Experimental Results of Testing a BIST Σ–Δ ADC on the HOY Wireless Test Platform,” Journal of Electronic Testing: Theory and Applications (JETTA), Vol. 28, Issue 5, pp. 571-584, Nov. 2012, DOI:10.1007/s10836-012-5302-7 (SCI)
2014 Yi Chiu, Hao-Chiao Hong, and Po-Chih Wu, "Development and Characterization of a CMOS-MEMS Accelerometer with Differential LC-Tank Oscillators," IEEE Journal of Microelectromechanical SystemsVol. 22, No.6, pp. 1285-1295, Dec.,  2013. (SCI)
2014 Yi Chiu, Tsung-Chih Huang, and Hao-Chiao Hong, "A Three-Axis Single-Proof-Mass CMOS-MEMS Piezoresistive Accelerometer with Frequency Output," Sensors and Materials, Vol. 26, No. 2,  pp. 95–108, February, 2014 (SCI)
2013 Hao-Chiao Hong and Cheng-Wen Wu, “Selection of high-order analog response extractor for S-D modulation based analog built-in self-test applications,” International Journal of Electrical Engineering, Vol. 11, No.2, pp.103-115, May, 2004.
年度 论文名称
2017 C.-Y. Chiang, L.-Y. Lin, H.-C. Hong, "Design and experimental results of a wireless power receiver for the water pollution detection system," Proc. IEEE International Symposium on Next-Generation Electronics (ISNE), 2015, pp. 1-4 (IEEE)
2017 H.-Y. Huang, S.-Z. Yen, J.-H. Chen, H.-C. Hong, K.-H. Cheng, " Low-Voltage Indoor Energy Harvesting Using Photovoltaic Cell,"  Proc. the IEEE Design and Diagnostics of Electronic Circuits and Systems Workshop (DDECS), Slovakia, April, 2016 (IEEE) 
2017 Y. Chiu, H.-C. Hong, and C.-W. Lin, "Inductive CMOS MEMS accelerometer with integrated variable inductors," IEEE MEMS Conf. 2016, China, pp. 974-7 (IEEE)
2017 H.-C. Hong, " Analysis for the Optimal Designs of Two-coil Inductive Coupling Wireless Power Transfer Systems," presented in Progress In Electromagnetics Research Symposium (PIERS), St. Petersburg, Russia, May, 2017
2017
2017 Y. Chiu and H.-C. Hong, " Electromagnetic energy harvester with embedded ferrofluid in PCB technology," Proc. the 17th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS)Kanazawa, Japan, Nov., 2017
2017 H.-C. Hong, Y.-T. Chen, S.-F. Hung, C.-C. Wu, and Y. Chiu, "A cost-effective angle demodulator IC for path matched differential interferometry based sensors," in Proc. IEEE Sensors Conference, Valencia, Spain, November, 2014 , pp. 209-212 (IEEE)
2017 C.-C. Chang and H.-C. Hong, "A 5MS/s Fully-Differential SAR ADC with an ENOB of 8.5," in Proceedings of International Conference on Electrical Engineering and Computer Science (EECS), Tokyo, Japan, March, 2013pp. 1-4
2017 S.-F.. Hung, L.-Y. Lin, and H.-C. Hong, "Testing the Fleischer-Laker switched-capacitor biquad using the diagnosis-after-test procedure,” in Proceedings of  the 9th International SoC Design Conference (ISOCC), Jeju, Korea, Nov., 2012pp.179-184 (IEEE)
2017 R.-Z. Kuo and H.-C. Hong, “Design of an ultra-low power SAR ADC for biomedical applications,” in Proc. the 2nd International Conference on BioSensors, BioElectronics, BioMedical Devices, BioMEMS/NEMS and Applications (Bio4Apps), Tokyo, Japan, Oct., 2013
2017 L.-Y. Lin and H.-C. Hong, “Design of a fault-injectable Fleischer-Laker switched-capacitor biquad for verifying the static linear behavior fault model,” in Proc. International Asian Test Symposium  (ATS), Yi-Lan, Nov., 2013 (EI, IEEE) , pp. 62-66

2017 R.-Z. Kuo and H.-C. Hong, "A 17-nW, 0.5V, 500S/s, Rail-to-Rail SAR ADC with 8.1 Effective Number of Bits", in Proc. the International VLSI Design, Automation and Test Symposium (VLSI-DAT), Hsinchu, pp. 1-4, April, 2014  (IEEE) 
2017 Y.-W. Chen and H.-C. Hong, " A Fast-Locking All-Digital Phase Locked Loop in 90nm CMOS for Gigascale Systems," in Proc. the IEEE International Symposium on Circuits and Systems (ISCAS), Melbourne, Australia, June, 2014pp. 1134-1137 (IEEE) 
2017 S.-F. Hung,  L.-Y. Lin, and H.-C. Hong, "A Cost-Effective Stimulus Generator for Battery Channel Characterization in Electric Vehicles," in Proc. IEEE Asian Test Symposium,  HangZhou, November, 2014,  pp. 63-67, (IEEE)

2017 Y. Chiu, R. P. Bargayo, and H.-C. Hong, " Stacked electret energy harvesting system fabricated with folded flexible printed circuit board," Proc. Power MEMS, Atlanta, Dec. 2012, pp. 149-152
2017 C.-Y. Chiang, H.-C. Hong, J.-C. Chiao, L.-Y. Lin, and Y. Chiu, “A wirelessly-powered implantable stimulator for relieving gastroparesis symptoms,” in Proc. the 4th International Conference on BioSensors, BioElectronics, BioMedical Devices, BioMEMS/NEMS and Applications (Bio4Apps), Fukuoka, Japan, Dec., 2015 
2017 H.-C. Hong, L.-Y. Lin, and C.-J. Liu, " Design of an On-Scribe-Line 12-bit Dual-Slope ADC for Wafer Acceptance Test," Proc. IEEE International Conference on Applied System Innovation (CASI), Sapporo, Japan, May, 2017 (EI, IEEE)
2017 Y. Chiu, H.-C. Hong, and C.-M. Chang, " Three-axis CMOS MEMS inductive accelerometer with novel Z-axis sensing scheme," Proc. the 19th International Conference on Solid-State Sensors, Actuators, and Microsystems (Transducers), Kaohsiung, Taiwan, Jun., 2017
2016 Y. Chiu, H.-C. Hong, and W.-H. Hsu, "Effect of asymmetric structures on output enhancement in electromagnetic energy harvesters fabricated by rigid-flex PCB technology," Proc. Asia-Pacific Conference of Transducers and Micro-Nano Technology, APCOT 2016, Japan (2016) 
2016 Yi Chiu, Hao-Chiao Hong, and Po-Chih Wu “CMOS-MEMS accelerometer with differential LC-tank oscillators,” Proc. IEEE Sensors Conference, October, 2012, pp. 1-4 (IEEE)
2016 Y. Chiu, B.-T. Chen, and H.-C. Hong, “Integrated CMOS MEMS liquid capacitive inclinometer,” Proc. the 18th International Conference on Solid-State Sensors, Actuators and Microsystems, Transducers 2015, U.S.A, pp. 1152-5 (2015) 
2014 Shao-Fung Hung, Hao-Chiao Hong, and Sheng-Chaun Liang “A Low-Cost Output Response Analyzer for the Built-in-Self-Test S-D Modulator Based on the Controlled Sine Wave Fitting Method,” in Proceedings of the IEEE Asian Test Symposium (ATS), pp.385-388, November, 2009 (IEEE)
2014 Chen-Kang Ho and Hao-Chiao Hong, “A 6-GS/s, 6-bit, At-speed Testable ADC and DAC Pair in 0.13mm CMOS,” in Proceedings of the International Symposium on VLSI Design, Automation, and Test (VLSI-DAT), pp.207-210, April, 2009 (Granted the best paper award, symposium acceptance rate=30%, 53/178) (IEEE)
2014  Hao-Chiao Hong, Sheng-Chaun Liang, and Hong-Chin Song, “A cost effective BIST second-order S-D modulator,” in Proceedings of the IEEE Design and Diagnostics of Electronic Circuits and Systems Workshop (DDECS), pp.314-319, April, 2008 (IEEE)
2014 Sheng-Chaun Liang, Ding-Jyun Huang, Chen-Kang Ho, and Hao-Chiao Hong, “10 GSamples/s, 4-bit, 1.2V, Design-for-Testability ADC and DAC in 0.13um CMOS Technology,” in Proceedings of the IEEE Asian Solid-State Circuits Conference (A-SSCC), pp. 416-419, October, 2007, (acceptance rate=32%, 107/332) (IEEE)
2014 Hao-Chiao Hong and Sheng-Chaun Liang, “A cost effective output response analyzer for S-D modulation based BIST systems,” in Proceedings of the 15th IEEE Asian Test Symposium (ATS), pp.255-261, Nov. 2006. (IEEE)
2014 Hao-Chiao Hong, “Improving the behavioral simulation accuracy of the design-for-digital-testability second-order S-D modulator,” in the 11th International Mixed-Signal Testing Workshop (IMSTW), Canne, June, 2005 (IEEE)
2014 Hao-Chiao Hong, “Design-for-digital-testability 30MHz second-order S-D modulator,” in Proceedings of the IEEE 2004 Custom Integrated Circuit Conference (CICC) , pp. 211-214, October, 2004 (IEEE)
2014 Hao-Chiao Hong, Jyun-Liang Huang, Kwang-Ting Cheng, and Cheng-Wen Wu, “On-chip analog response extraction with 1-bit Sigma-Delta modulators,” in Proceedings of the 11th IEEE Asian Test Symposium (ATS), pp. 49-54, Nov., 2002 (IEEE)
2014 Hao-Chiao Hong, Bin-Hong Lin, and Cheng-Wen Wu, “Design and Analysis of multiple-bit Sigma-Delta modulator,” in Proceedings of the IEEE Asia and South Pacific Design Automation Conference (ASPDAC), pp. 419-424, Jan., 1997 (IEEE)
2014 pp.78-81, Santa Barbara, California, May, 2011 (IEEE)' target='_blank'>Shao-Fung Hung and Hao-Chiao Hong, "A Fully Integrated Built-in Self-Test Sigma-Delta ADC on a Wireless Test Platform," in Proceedings of IEEE International Mixed-Signals, Sensors, and Systems Test Workshop (IMS3TW'11), pp.78-81, Santa Barbara, California, May, 2011 (IEEE)
2014 pp.110-113,  Santa Barbara, California, May, 2011 (IEEE)' target='_blank'>Shao-Fung Hung and Hao-Chiao Hong, “Design of a Design-for-Digital-Testability Third-Order Sigma-Delta Modulator,” in Proceedings of IEEE International Mixed-Signals, Sensors, and Systems Test Workshop (IMS3TW'11) , pp.110-113,  Santa Barbara, California, May, 2011 (IEEE)
2014 pp.119-121, Taipei, Taiwan, May, 2012 (IEEE)' target='_blank'>Shao-Fung Hung, Long-Yi Lin, and Hao-Chiao Hong, "A study on the design of a testable Fleischer-Laker switched-capacitor biquad," in Proceedings of International Mixed-Signals, Sensors, and Systems Test Workshop (IMS3TW'12), pp.119-121, Taipei, Taiwan, May, 2012 (IEEE)
2014 Hao-Chiao Hong, Shao-Huey Shieh, and Cheng-Wen Wu, “Optimization of the spanning tree carry look-ahead adder,” in Proceedings of the 7th VLSI/CAD symposium, pp. 253-256, Aug., 1996 
2014 Hao-Chiao Hong, Cheng-Wen Wu, and Kwang-Ting Cheng, “A S-D modulation based BIST system with a wide bandwidth fifth-order analog response extractor for diagnosis purpose,” Proceedings of the 13th IEEE Asian Test Symposium (ATS), pp. 62-67, KenTing, November, 2004 (IEEE)
2013 Long-Yi Lin, Shao-Feng Hung, and Hao-Chiao Hong, “A Test Procedure to Test for the Capacitor Ratios of a Switched-Capacitor Biquad,” in the 6th VLSI Test Technology Workshop (VTTW), July, 2012
2013 Kin-Man Lei and Hao-Chiao Hong, “A 12-bit 25MS/s Asynchronous SAR ADC,” in Proceedings of the 22nd  VLSI Design/CAD Symposium, August, 2011
2013 Rong-Zhou Kuo and Hao-Chiao Hong “An Ultra-low Power Rail-to-Rail Successive Approximation ADC with an 8.3 ENOB,” in Proceedings of the 21st VLSI Design/CAD Symposium, pp.687-690, Aug., 2010
2013 Tsung-Yin Hsieh and Hao-Chiao Hong, “A 1.76uW, 0.9V, 8-bit successive approximation register ADC with fully-differential input capability,” in Proceedings of the 18th VLSI Design/CAD Symposium, pp. 123-127, August, 2007
2013 Hao-Chiao Hong and Cheng-Wen Wu, “Optimal integrator gain design of extended MASH high-order S-D modulator,” in Proceedings of the 8th VLSI Design/CAD Symposium, pp. 333-336, Aug., 1997 
计画类别 年度 计画名称 参与人 职称/担任之工作 计画期间 补助/委讬或合作机构
研究计画 2015 永续型pH值传感微系统-子计画三:永续型pH值传感微系统之无线传能 与资料传输电路设计技术(II, III) 洪浩乔 主持人 2015.08 ~ 2017.07 科技部
研究计画 2014 永续型pH值传感微系统-子计画三:永续型pH值传感微系统之无线传能 与资料传输电路设计技术(I) 洪浩乔 主持人 2014.08 ~ 2015.07 科技部
产学合作计画 2014 Wireless WAT 洪浩乔 主持人 2014.05 ~ 2015.05 台积电
研究计画 2013 具通讯与容错功能之智慧車用电池模组管理系统-子计画三:具电池通 讯通道特性自我测试功能的电池通讯类比前端积体电路设计 (III) 洪浩乔 主持人 2013.08 ~ 2014.07 科技部
研究计画 2012 具通讯与容错功能之智慧车用电池模组管理系统-子计画四:具电池通讯通道特性自我测试功能的电池通讯类比前端积体电路设计(II) 洪浩乔 计画主持人 2012.07 ~ 2013.08 国科会
研究计画 2012 微型惯性传感元件之讯号处理技术与最佳化设计研究(II)-子计画二:光学式微型惯性传感元件的同调干涉讯号处理芯片设计研究 洪浩乔 计画主持人 2012.01 ~ 2012.12 国科会
研究计画 2011 具通讯与容错功能之智慧车用电池模组管理系统-子计画四:具电池通讯通道特性自我测试功能的电池通讯类比前端积体电路设计(I) 洪浩乔 子计画四主持人 2011.08 ~ 2012.07 国科会
研究计画 2010 具通信功能之車用功率系统芯片-子计画一:車用电源线通讯系统之類比前端积体电路设计(3/3) 洪浩乔 子计画一主持人 2011.07 ~ 2012.08 国科会
研究计画 2009 具通信功能之車用功率系统芯片-子计画一:車用电源线通讯系统之類比前端积体电路设计(2/3) 洪浩乔 子计画一主持人 2009.08 ~ 2010.07 国科会
研究计画 2008 具通信功能之車用功率系统芯片-子计画一:車用电源线通讯系统之類比前端积体电路设计(1/3) 洪浩乔 子计画一主持人 2008.08 ~ 2009.07 国科会
研究计画 2008 适用于使用开路放大器设计之低功率管线式类比数码转换器的数码校正方法 洪浩乔 主持人 2008.01 ~ 2012.08 国科会
研究计画 2007 适用于心电图应用之微瓦级1伏十位元類比數位转换器设计 洪浩乔 主持人 2007.08 ~ 2008.07 国科会
产学合作计画 2005 Project HOY (Hypothesis, Odyssey and Yield)—Advanced Wireless Test Platform and Technologies (PI: Prof. Cheng-Wen Wu of National Tsinghua University) 洪浩乔 Subproject A Co-P.I. 2005.12 ~ 2009.11 经济部
产学合作计画 2005 学界科专: 芯片系统传输链技术开发三年计画 苏朝琴、郑国兴、洪浩乔 分项计画名称:芯片系统内传输链结-实体层设计及内建测试共同主持人 2005.03 ~ 2008.12 经济部
发表日期 专利名称
2016/07/15 Hao-Chiao Hong, Yu-Che Chen, and Shao-Feng Hung, "使用周期性重置积分之角度解调变装置及其方法" ROC patent I538408, issued on Jun. 11, 2016
2016/03/18 Hao-Chiao Hong, “于类比测试中可接收数码测试激发讯号之可重新规划切换电容输入电路” ROC patent number I270254, issued on January, 2007
2016/03/18 Hao-Chiao Hong, “高阶积差式调变器” ROC patent number 077991, issued on May 1, 1996
2016/03/18 Hao-Chiao Hong and Yu-Shian Wang, "数码类比转换电路及其权重误差估测与校正方法," ROC patent I456907, issued on Oct. 11, 2014
2016/03/18 Hao-Chiao Hong and Yu-Shian Wang, "DIGITAL-TO-ANALOG CONVERTER (DAC) CIRCUIT AND WEIGHT ERROR ESTIMATION/CALIBRATION METHOD THEREOF," USA patent US 8,836,554B2 issued on Sep. 16, 2014
2016/03/18 Hao-Chiao Hong, “利用数码激发讯号来准确测量放大器开路增益之装置,” ROC patent  I361900 issued on Apr. , 2012.
2016/03/18 Hao-Chiao Hong and Tsung-Yin Hsieh, "Method for estimating capacitance weight errors and successive approximation analog-to-digital converter using the same," US patent number 8,907,826B2, issued on December 9, 2014
2016/03/18 Hao-Chiao Hong, Yu-Che Chen, and Shao-Feng Hung, "PERIODICALLY RESETTING INTEGRATION ANGLE DEMODULATION DEVICE AND METHOD USING THE SAME" USA patent US9,048,785B2 issued on Jun. 2, 2015 
2016/03/18 Hao-Chiao Hong and Tsung-Yin Hsieh, "估测逐次渐近类比数码转换器中电容权重误差之方法与其应用于校正该逐次渐进类比数码转换器,"  ROC patent I501562, issued on September 21, 2015 
2016/03/18 Hao-Chiao Hong, "超大型电晶体阵列式电气参数测试装置" ROC patent I509267, issued on Sep. 21, 2015 
2014/11/10 Hao-Chiao Hong, “A reconfigurable switched-capacitor input circuit with digital stimulus acceptability for analog tests,” U.S.A. patent US7,236,116B2, Jun. 26, 2007.
2014/11/10
Hao-Chiao Hong,Bandgap reference voltage generator with a low-cost, low-power, fast start-up circuit,” U.S.A. patent 6,972,550, Dec. 6, 2005
2014/11/10 Hao-Chiao Hong, “Device for accurately measuring amplifier’s open-loop gain with digital stimuli,” U.S.A. patent US8,112,236B2, issued on Feb. 7, 2012.
2014/11/10 利用数字激发讯号来准确测量放大器开路增益之装置,” 中国大陆专利, PRC patent ZL 200810002352.5 issued on 2011/11/02 有效期限 2008/01/15- 2028/01/15' target='_blank'> Hao-Chiao Hong, “利用数字激发讯号来准确测量放大器开路增益之装置,” 中国大陆专利, PRC patent ZL 200810002352.5 issued on 2011/11/02 有效期限 2008/01/15- 2028/01/15
年度 名称 发表日期 全部作者
2013
Hao-Chiao Hong, Shen-Pai Lin, Yi-Huang Liu, Hung-Yi Wen, Po-Chih Wu, Yi-Wey Chen, Kin-Man Lei, “A digital calibration scheme for the design of the low power pipelined ADC with open-loop amplifiers” Research Project NSC 97-2221-E-009-169-MY3 final report, National Science Council, Taiwan, R.O.C., April, 2012.
2013-06-05
2012 Hao-Chiao Hong, Shao-Feng Hung, Chih-Chien Chang, Yu-Shian Wang, and Kin-Man Lei, “Design of a power line communication SoC for automobiles, Subproject- I: Design of the analog front end IC for power line communication on automobiles” Joint Research Project NSC 99-2220-E-009-023- final report, National Science Council, Taiwan, R.O.C., August, 2011 2012-07-08
2011 Hao-Chiao Hong, Ming-Ta Ho, Kun-Chih Wu, and Yi-Wey Chen “A digital calibration scheme for the design of the low power pipelined ADC with open-loop amplifiers (NSC97-2221-E-009 -169 -MY3) annual report, National Science Council, Taiwan, R.O.C., August, 2010. 2011-08-01
2011 Hao-Chiao Hong, Shao-Feng Hung, Zhi-Jian Chang, Yu-Shian Wang, and Kin-Man Lei “Design of a power line communication SoC for automobiles (PI: Prof. C.-C. Su, National Chiao Tung University), Subproject-I: Design of the analog front end IC for power line communication on automobiles (NSC98-2220-E-009 -036 -) annual report, National Science Council, Taiwan, R.O.C., August, 2010. 2011-08-01
2011 Hao-Chiao Hong, Ming-Ta Ho, and Kun-Chih Wu,, “A digital calibration scheme for the design of the low power pipelined ADC with open-loop amplifiers” (NSC97-2221-E-009 -169 -MY3) annual report, National Science Council, Taiwan, R.O.C., August, 2009. 2011-08-01
2011 Hao-Chiao Hong, Sheng-Chaun Liang, Tsung-Yin Hsieh, Zhi-Jian Chang, and Wai-Jay Fang “Design of a power line communication SoC for automobiles (PI: Prof. C.-C. Su, National Chiao Tung University), Subproject-I: Design of the analog front end IC for power line communication on automobiles (NSC97-2220-E-009 -048 -) annual report, National Science Council, Taiwan, R.O.C., August, 2009. 2011-08-01
2011 Hao-Chiao Hong, Sheng-Chaun Liang, Shao-Feng Hung, “Project HOY (Hypothesis, Odyssey and Yield)—Advanced Wireless Test Platform and Technologies, Subproject-A, Item I: BIST Techniques for Σ−Δ Modulators ” Joint Research Project 97-EC-17-A-01-S1-002 final report, Ministry of Economic Affairs, Taiwan, R.O.C., Dec., 2009. 2011-08-01
2011 Hao-Chiao Hong, Sheng-Chaun Liang, Rong-Zhou Kuo, and Tsung-Yin Hsieh, “A 1-V, 10-bit micro-Watt ADC for ECG applications” Research Project NSC 96-2221-E-009-232- final report, National Science Council, Taiwan, R.O.C., August, 2008. 2011-08-01
2011 Hao-Chiao Hong, Sheng-Chaun Liang, Shao-Feng Hung, “Project HOY (Hypothesis, Odyssey and Yield)—Advanced Wireless Test Platform and Technologies, Subproject-A, Item I: BIST Techniques for Σ−Δ Modulators ” Joint Research Project 96-EC-17-A-01-S1-002 annual report, Ministry of Economic Affairs, Taiwan, R.O.C., Dec., 2008. 2011-08-01
2011 Hao-Chiao Hong, Yung-Shun Chen, and Wai-Jay Fang “Circuit & system design and verification platform of SoC on-chip transmission links, Subproject-B: Physical Layer Design, Item III: Design of 10GS/s ADC and DAC” Joint Research Project 96-EC-17-A-01-S1-037 final report, Ministry of Economic Affairs, Taiwan, R.O.C., March, 2008. 2011-08-01
2011 Hao-Chiao Hong, Sheng-Chaun Liang, Fang-Yi Su, “ Project HOY (Hypothesis, Odyssey and Yield)—Advanced Wireless Test Platform and Technologies, Subproject-A, Item I: BIST Techniques for Σ−Δ Modulators ” Joint Research Project 95-EC-17-A-01-S1-002 annual report, Ministry of Economic Affairs, Taiwan, R.O.C., Dec., 2007. 2011-08-01
2011 Hao-Chiao Hong, Rong-Zhou Kuo, and Tsung-Yin Hsieh, “The Design and Fabrication of an Ultra Low Power Micro-sensing Module for Wireless Sensor Networks, Subproject-V: Design-for-digital-testability analog-to-digital converter with ultra-low power consumption.” Research Project NSC95-2221-E009-344 final report, National Science Council, Taiwan, R.O.C., August, 2007. 2011-08-01
2011 Hao-Chiao Hong, Chen-Kang Ho, and Yung-Shun Chen, “Circuit & system design and verification platform of SoC on-chip transmission links, Subproject-B: Physical Layer Design, Item III: Design of 10GS/s ADC and DAC” Joint Research Project 95-EC-17-A-01-S1-037 annual report, Ministry of Economic Affairs, Taiwan, R.O.C., March, 2007. 2011-08-01
2011 Hao-Chiao Hong, Sheng-Chaun Liang, Hong-Chin Song, “Project HOY (Hypothesis, Odyssey and Yield)—Advanced Wireless Test Platform and Technologies, Subproject-A, Item I: BIST Techniques for     Modulators ” Joint Research Project 94-EC-17-A-01-S1-002 annual report, Ministry of Economic Affairs, Taiwan, R.O.C., Dec., 2006. 2011-08-01
2011 Hao-Chiao Hong and Guo-Ming Lee, “The Design and Fabrication of an Ultra Low Power Micro-sensing Module for Wireless Sensor Networks, Subproject-V: Design-for-digital-testability analog-to-digital converter with ultra-low power consumption.” Research Project NSC94-2215-E009-081 final report, National Science Council, Taiwan, R.O.C., August, 2006. 2011-08-01
2011 Hao-Chiao Hong, Ding-Jyun Huang, and Chen-Kang Ho, “Circuit & system design and verification platform of SoC on-chip transmission links, Subproject-B: Physical Layer Design, Item III: Design of 10GS/s ADC and DAC.” Joint Research Project 94-EC-17-A-01-S1-037 annual report, Ministry of Economic Affairs, Taiwan, R.O.C., March, 2006. 2011-08-01
2011 Hao-Chiao Hong, “Ultra-Low Power and Digitally Testable Analog-to-Digital Converter.” Research Project NSC93-2215-E009-050 final report, National Science Council, Taiwan, R.O.C., August, 2005. 2011-08-01
2011 邱俊诚, 洪浩乔, 及黄鼎钧, "Design of the MEMS Gyro driver,"工研院系统与航太技术发展中心委讬技术开发合作案, Dec., 2004. 2011-08-01
年度 实验室名称 位置
前瞻混合讯号电路暨可测试设计实验室 工程五馆807室
国家 学校名称 系所 学位 期间
台湾 清华大学 电机系 博士 ~ 2003.06
台湾 清华大学 电机系 硕士 1990.09 ~ 1992.06
台湾 清华大学 电机系 学士 1986.09 ~ 1990.06
服务机关名称 单位 职务 期间
交通大学 电机工程学系 教授 2012.08 ~ 迄今
交通大学 电机工程学系 副教授 2009.03 ~ 2012.07
交通大学 电机与控制工程学系 副教授 2008.08 ~ 2009.03
交通大学 电机与控制工程学系 助理教授 2004.02 ~ 2008.08
积丞科技 类比矽智产部 资深经理 2001.08 ~ 2004.01
台积电 设计服务处 主任工程师 1997.06 ~ 2001.06
类别 年度 奖项名称 颁奖单位
校内荣誉事项 2018 优良教学奖 交通大学电机资讯学院在职专班
校内荣誉事项 2018 电机学院优良教学奖 交通大学电机学院
校外荣誉事项 2017 指导学生张岂铭获2017 CIC 芯片制作成果发表会 微机电组 优等设计奖(与邱一教授同获) 国家实验院芯片设计中心
校内荣誉事项 2017 电机学院杰出教学奖 交通大学电机学院
校外荣誉事项 2016 指导学生林龙逸获最佳论文奖 The 10th VLSI Test Technology Workshop
校内荣誉事项 2016 电机学院杰出教学奖 交通大学电机学院
校内荣誉事项 2016 电机资讯学院杰出教学奖 电机资讯学院
校外荣誉事项 2013 指导学生吴柏奇荣获2013 CIC 芯片制作成果发表会 微机电组 特优奖(与邱一教授同获) 国家芯片系统设计中心
校外荣誉事项 2012 指导学生洪绍峰荣获2012 CIC 芯片制作成果发表会 类比电路组 优良设计奖 国家芯片系统设计中心
校外荣誉事项 2012 指导学生洪绍峰同学荣获2012金矽奖评审团钻石大赏 旺宏电子
校外荣誉事项 2010 指导学生何振纲荣获2009 International Symposium on VLSI Design, Automation and Test Best Paper Award International VLSI-DAT Symposium
校外荣誉事项 2010 指导学生洪绍峰荣获2010 CIC 芯片制作成果发表会 类比电路组 佳作设计奖 国家芯片系统设计中心
校外荣誉事项 2010 2010教育部前瞻系统芯片设计人才培育先导型计画教材优等(与邱一教授同获) 教育部
校外荣誉事项 2009 指导学生谢宗殷、郭荣洲荣获2009CIC芯片制作成果发表会佳作设计奖(类比) 国家芯片系统设计中心
校外荣誉事项 2009 指导学生陈永顺、方韦杰荣获2009CIC芯片制作成果发表会优良设计奖(类比) 国家芯片系统设计中心
校外荣誉事项 2008 指导学生何振纲、陈永顺荣获国家芯片系统设计中心 2008 CIC芯片制作成果发表会 佳作设计奖 国家芯片系统设计中心
校外荣誉事项 2007 指导研究生李国铭获2007年CIC优良芯片设计类比组佳作 国家芯片系统设计中心
校外荣誉事项 2007 指导研究生黄鼎钧、何振纲获2007年CIC优良芯片设计类比组佳作 国家芯片系统设计中心
校外荣誉事项 2006 指导学生黄鼎钧、何振纲荣获全国大学院校IC设计竞赛类比电路设计(不分组) 优等 教育部
校内荣誉事项 2005 94学年第一学期绩优导师奨 交通大学